Post

Optimal settings for OScam Cache-EX MODE 3

OScam Cache-EX is very CPU/RAM intensive  and can also consume a lot of your internet bandwith. Therefore you need to have proper settings and proper version of OScam.

If you DO NOT want to have memory problems, please use OScam version 7190! Later versions have stability problems and are not recommended.  Latest versions of OScam should be already OK, so i strongly recommend you start using them!!

For internet bandwith problems, please follow this guide. I made it with the help of users on satfriends.com forum and my own mind of course :)

Optimal Settings for Camd35

oscam.server

[reader]
label                         = xxx
protocol                      = camd35
device                        = xxx,17835
user                          = xxx
password                      = xxx
cacheex                       = 3
cacheex_maxhop                = 2
group                         = 1,4,5,6,10,20 # 20 is group which is intended to be used only for cacheex
dropbadcws                    = 1
audisabled                    = 1

oscam.user

[account]
user                          = xx
pwd                           = xxx
group                         = 20
uniq                          = 3
cacheex                       = 3
cacheex_maxhop                = 2
allowedprotocols              = camd35

Bolded lines are important if you want to control internet bandwith consumption. At first i used 4 instead of 2. Well, not a good decision, because OScam was sometimes using more that 200KB/s of my internet bandwith!! And i only have 3Mbit of upload. With setting “2”, consumption dropped to around 30KB/s which is alot lower number. Browsing internet sites is also faster now.

Optimal Settings for CCcam (recommended protocol)

oscam.server

[reader]
label                         = xx
protocol                      = cccam
device                        = xx,20000
user                          = sfxxTV-ca
password                      = xx
cacheex                       = 3
cacheex_maxhop                = 2
group                         = 1,4,5,6,10,20
dropbadcws                    = 1
cccversion                    = 2.3.0
ccckeepalive                  = 1
cccreconnect                  = 0
cccreshare                    = 0
cccmaxhops                    = 0
audisabled                    = 1

oscam.user

[account]
user                          = tuxrbxx
pwd                           = txx
uniq                          = 3
group                         = 20
cacheex                       = 3
cacheex_maxhop                = 2
cccmaxhops                    = -1 #important, because you dont want, that your cache-ex peer sees your CCcam cards!!
cccreshare                    = 0

You should also use these settings for oscam.conf file:

[global]
clienttimeout                 = 10000
nice                          = -1
dropdups                      = 1
cacheexwaittime               = 0 # this setting is not indented to be used with mode 3 cacheex!
max_cache_time                = 12
max_cache_count               = 7500

[csp]
port                          = 12464 #doesnt matter just choose one number.
wait_time                     = 100 #currently this is the best settings for cacheex. Yes i know, this section is for CSP but you need to use it for cacheex in mode 3! Very important!!

Additional info about some new settings that were added in recent versions of OScam!

[csp]
wait_time = global for csp,cacheex mode 2 and mode 3
csp_ecm_filter = block incoming ecm (csp only)

oscam.user
[account]
cacheex_ecm_filter = block incoming ecm (mode 3 only) from current user
caid = block outgoing ecm (mode 3) from you to selected user

oscam.server
[reader]
cacheex_ecm_filter = block incoming ecm (mode 2 only) from current reader

I got this info from user TNe-Two on streamboard forum!

FOR DISCUSSION ABOUT THIS ARTICLE VISIT THIS THREAD ON FORUM:

http://www.satnigmo.com/forum/index.php?threads/optimal-settings-for-oscam-cache-ex.495/

  • how can i put oscam 7190 version manualy please??

    Showtimetv

    September 4, 2012

  • Ask this on forum. Thanks

    Taykun_Si

    September 4, 2012

  • Hi!

    Does the new OSCAM 1.20-unstable_svn build r85XX also needs the csp parameter?

    Could you explain better the new Oscam csp settings on newewst Oscam builds?

    Thanks!!

    prevaricador

    March 29, 2013

  • Hi,

    Thank you for you tutorial.
    In option:
    oscam.user
    [account]
    cacheex_ecm_filter = block incoming ecm (mode 3 only) from current user

    I want delete caid i don’t receive. I need write only caid i want receive? or wirte caid i don’t want receive?

    exemple:
    I want receive only 0100 and 1802
    cacheex_ecm_filter = 0100,1802
    it’s correct?

    Thank you

    Ricain

    October 24, 2015

Leave a comment  

name*

email*

website

Submit comment

CommentLuv badge

Powered by moviekillers.com.com