Post

Connect MGCamd and CCcam

You probably know MGCamd. This is great client EMU that is in my opinion better than CCcam and OScam (as client!!). Configuring is quite easy, you just need to have right instructions. For example, OScam is real pain in the arse when you want to set it up.

Well I prepared a package for you: http://www.satnigmo.com/MGCAMD_1.38_MIPS.rar

Here you will get mgcamd 1.36 for mipsel receivers (VU+, CT and Dreambox receivers) + two config files. One is called mg_cfg, other one is cccam.list. Both files need to be in var/keys

mg_cfg is already edited so it can be used immediately (mgcamd+cccam connection)! What you need to do is to make a C line and copy/paste it in cccam.list file. Easy! I assume you know how to make C line? First you need to make F line on your server side where cccam is running. Then simply make C line from that F line! For more instruction check google 😉

And thats it! You now have MGCamd which is connected to CCcam server. You will see that MGCamd is very fast when it comes to zapping speed 😉

FOR DISCUSSION ABOUT THIS ARTICLE VISIT THIS THREAD ON FORUM:

http://www.satnigmo.com/forum/index.php?threads/connect-mgcamd-with-cccam.532/

  • # EMM messages
    # 00 don’t show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 02 }

    # ECM messages
    # 00 don’t show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 02 }

    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 01 }

    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    # + tps SID, which pmt pid contains au pid
    U: { 01 }

    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }

    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    G: { 32 }

    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 }

    # network ecm timeout in seconds
    K: { 02 }

    # newcamd dead routes connect retry, sec
    Q: { 10 }

    # network shares priority
    # 00 gbox, newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd, gbox
    # 02 newcamd, camd3, gbox, radegast
    P: { 01 }

    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 }

    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 11 } 80

    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 00 }

    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }

    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 04 }

    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 00 }

    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }

    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    B: { 06 }

    # Mapping 18xx
    # 00 disable mapping
    # 01 map 18xx to 1801
    F: { 00 }

    admin

    September 26, 2011

  • here is optimized mg_cfg from me 😉

    admin

    September 26, 2011

  • could you reup those files please .

    Venimkmac

    February 28, 2012

  • […] we need to configure MGcamd which will be client to OScam server. I suggest that you read this article where you can also find correct files for running MGcamd on receiver. Remember this. MGcamd […]

Leave a comment  

name*

email*

website

Submit comment

CommentLuv badge

Powered by moviekillers.com.com