Post

What is CCcam

… is emulator used for the purpose of watching TV on linux satellite receiver.

Example: You have Sky Germany card and you want to use it outside of your original receiver. First you need receiver based on Linux (i would suggest Enigma 2 receiver), then you need to set up CCcam on this receiver.

This can be easy or hard job, it depends what are your technical skills. There are many tutorials on internet, how to use CCcam. I would suggest that you check my article CCcam Tutorial Collection. Enjoy!

Post

Connect OScam and CCcam using Newcamd protocol

You will have to edit or create three files: oscam.conf, oscam.user and CCcam.cfg!

oscam.conf:

[newcamd]
Key = 0102030405060708091011121314
Port = 34000@0b00:000000 #this is example for MTV Unlimited or any other Conax card that have 0b00 caid!

oscam.user:

[account]
User = test
Pwd = test2
Group = x #same as in oscam.server file
AU = xxx #same as in oscam.server file

CCcam.cfg:
N: 127.0.0.1 34000 test test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

First number is IP address of your OScam server. 127.0.0.1 is used when you have CCcam and OScam on same server or receiver. If you have OScam installed somewhere else, then use regular IP (192.168.1.x). Then there is port number (34000) and username(test)/password(test2).

At the end there are a bunch of strange numbers (01 02 03 04 05 06 07 08 09 10 11 12 13 14). They are always the same, do not change them!! You can also optionally add 256 at the end of N line. This means that your card will show as local card in CCcam. This trick is quite popular these days because many cards can be read in OScam only!

Newcamd Extended protocol also exists but its not supported within OScam. This protocol is better than ordinary Newcamd, because it supports more CAIDs per port. Because of this issue, ordinary Newcamd is not very user friendly!

For discussion please visit this thread:

http://www.satnigmo.com/forum/index.php?threads/oscam-to-cccam-newcamd-protocol.542/

For other “connect” tutorials, visit these links:

Post

Connect OScam with CCcam using Camd35 protocol

You will have to edit or create three files: oscam.conf, oscam.user and CCcam.cfg!

oscam.conf:

[cs357x] #DO NOT USE [camd35] as this is obsolete in newer oscams!
port = 15991 #this is an example, you can use different numbers
serverip = 192.168.1.11 #this is your IP of your server where you have your OScam running!

oscam.user:

[account]
User = test
Pwd = test2
Group = x #same as in oscam.server file
AU = xxx #same as in oscam.server file. You can use this universal settings: AU=1

CCcam.cfg:
L: 192.168.1.11 15991 test test2 0b00 000000 256

First number is IP address of your server. In my case its 192.168.1.11, you can also use 127.0.0.1 if you have CCcam and OScam running on the same receiver or server. Then there are port number (15991) and username(test)/password(test2).

At the end there is CAID number and provider ID of your package and you can also optionally add 256. This means that your card will show as local in CCcam. Same trick as with Newcamd protocol! Pretty neat, right?

Camd35 is considered to be better than Newcamd. The biggest limitation of Newcamd is that it only support one caid per port. For every caid you need to create different port. Pretty annoying! Camd35 on the other hand support more caids per port.

For discussion please visit this thread here:

http://www.satnigmo.com/forum/index.php?threads/oscam-to-cccam-camd35-protocol.543/

For other “connect” tutorials, visit these links:

Post

CCcam Smartcard SID Assign

Here is example for MTV Unlimited card. You need to put the line (located below) in CCcam.cfg and restart CCcam. Using Cccam 2.1.2 or any newer version is obligatory! Older versions do not support this feature.

SMARTCARD SID ASSIGN : /dev/ttyUSBx 0 { 6FF3, 6FEE, 6FEF, 6FF1, 6FF0, 6FFF }

You can change /dev/ttyUSBx to anything you want. If you have internal reader than change to /dev/sci0

SMARTCARD SID ASSIGN : /dev/sci0 0 { 6FF3, 6FEE, 6FEF, 6FF1, 6FF0, 6FFF }
Post

CCcam.cfg file example

You need to copy these lines into CCcam.cfg file. I recommend that you create .cfg file with Notepad ++.

# #
###############################################
#### Friends ####
###############################################
#
###############################################
#### Servers ####
###############################################
#
###############################################
#### NewcS ####
###############################################
# #
#N: 127.0.0.1 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
# #

###############################################
#### Config ####
###############################################

# SERVER LISTEN PORT : #
SERVER LISTEN PORT: 12680
ALLOW WEBINFO: yes
WEBINFO USERNAME: root
WEBINFO PASSWORD: dreambox1122
WEBINFO LISTEN PORT: 16001
#
DISABLE EMM: no
SHOW TIMING: yes
EMM THREADS : 4
EXTRA EMM LEVEL: yes
SOFTKEY FILE: /var/keys/SoftCam.Key
AUTOROLL FILE: /var/keys/AutoRoll.Key
STATIC CW FILE: /var/keys/constant.cw
CAID PRIO FILE: /var/etc/CCcam.prio
PROVIDERINFO FILE: /var/etc/CCcam.providers
CHANNELINFO FILE: /var/etc/CCcam.channelinfo
#
#CARD READER: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
#BOXKEY: /dev/sci0 00
#AU = yes
#
#CARD READER: /dev/sci1
#BOXKEY: /dev/sci1 0B XX XX XX
#AU = yes
#
#SERIAL READER : /dev/ttyUSB0 smartreader+
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4800000
#BOXKEY: /dev/ttyUSB0 0B XX XX XX

Powered by moviekillers.com.com