1. Welcome to brand new satellite community! Join now if you want to enjoy in discussions and participate in contests where you can earn awards.
    Dismiss Notice

Problems with 4.0 images and cccam

Discussion in 'CCcam Support' started by IdarO, Oct 21, 2013.

  1. IdarO

    IdarO New Member

    Hi

    I have lost Picture after trying to Upgrade til 4.0 images. NewEnigma and Peter Pan has same problem.
    Have a old DB7000 as server running Cardserver.
    Is there a change in CCCam.cfg that must be changed or is the problem at the server side.
     
    IdarO, Oct 21, 2013
    #1
  2. OldSkul

    OldSkul Administrator Staff Member

    Post your CCcam.cfg of your client.
     
    OldSkul, Oct 21, 2013
    #2
  3. IdarO

    IdarO New Member

    SOmething like this. Works With NewEnigma3.3.2 but not With 4.05.
    New DB 800Se V2
     

    Attached Files:

    IdarO, Oct 21, 2013
    #3
  4. OldSkul

    OldSkul Administrator Staff Member

    Seems ok (its default version). Where do you put this CCcam.cfg? In /etc/ folder? Maybe something changed in their newest images. I suggest you check their forums if anyone else has same problems. You can also just use this CCcam.cfg (simple version):
    # #
    ###############################################
    #### Friends ####
    ###############################################
    #


    #
    ###############################################
    #### Servers ####
    ###############################################
    #



    #
    ###############################################
    #### Gbox ####
    ###############################################
    #ccam 2.0
    #G: <ip> <remoteport> <localport> <pass_of_the_D-line> <peerpass_of_the_Gboxserver>
    #G: 192.168.1.2 2501 2500 12345678 AABBCCDD
    #ccam 2.01
    #G: <pass> <localhost> <localport> <peerpass> <peeraddress> <peerport>
    #|_________ CCcam-side _______| |___________ Gbox-side __________|
    #G: BBBBBBBB 192.168.1.26 5556 10021980 192.168.1.25 5555 { 0:0:2, 091F:000000, 0919:000000:2, 093B:000000:2 }
    #G: ACDA1475 delija999.dyndns.org 12600 B779977D bibony.dyndns.org 4050 { 0:0:1 }
    #
    ###############################################
    #### NewcS ####
    ###############################################
    # #

    #
    # #
    ###############################################
    #### Camd3 ####
    ###############################################
    # #
    # R: 127.0.0.1 678 0100 000080
    # #
    ###############################################
    #### Config ####
    ###############################################

    # SERVER LISTEN PORT : #
    SERVER LISTEN PORT: 12xxx
    ALLOW WEBINFO: yes
    WEBINFO USERNAME: root
    WEBINFO PASSWORD: xxx
    WEBINFO LISTEN PORT: 16121
    #
    DISABLE EMM: no
    SHOW TIMING: yes
    EMM THREADS : 4
    EXTRA EMM LEVEL: yes
    SOFTKEY FILE: /var/keys/SoftCam.Key
    AUTOROLL FILE: /var/keys/AutoRoll.Key
    STATIC CW FILE: /var/keys/constant.cw
    CAID PRIO FILE: /var/etc/CCcam.prio
    PROVIDERINFO FILE: /var/etc/CCcam.providers
    CHANNELINFO FILE: /var/etc/CCcam.channelinfo
    #
    #CARD READER: /dev/sci0
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
    #BOXKEY: /dev/sci0 00
    #AU = yes
    #MINIMUM DOWNHOPS: 1
    #CARD READER: /dev/sci1
     
    OldSkul, Oct 22, 2013
    #4
    Melgas likes this.
  5. IdarO

    IdarO New Member

    When i install NewEnigma image there is already a CCCam.cfg in /etc/ folder. I overwrite it With my file but it does not work.
    Since there is already a file there it is logical that its the right Place.
    i have read about mg_cfg Box type that must be set to 06. is that on server side ? Does that make sense when i'm using CCcam in Client or is that when I use MgCamd on Client instead of CCcamd.
    What other cam can you adwise me to try that is easy to set up and that work With cardserver
     
    IdarO, Oct 22, 2013
    #5
  6. OldSkul

    OldSkul Administrator Staff Member

    mg_cfg is only for mgcamd. I recommend OScam of course. It can be a client to CCcam server.
     
    OldSkul, Oct 22, 2013
    #6
    Melgas likes this.
  7. IdarO

    IdarO New Member

    I think it is a newcamd server running on my old DB7000. Has been running for almost 10 years. Have not tuched this DB for at least 5 years so i dont really remember.
    Setup is in a cardserv.cfg file.
    Du you have a example on a Oscam config file ?
    PS thanks for helping. It is really a blow to buy a New DB and not be able to make it work.
     
    IdarO, Oct 22, 2013
    #7
  8. IdarO

    IdarO New Member

    Downloaded and installed TS panet and it did not work. Was not able to Connect internet.
    Saw that DNS was not set in network setup. Set DNS same as Gateway.
    Needed that sice my Client was using DynDNS address. Voila everything OK.
     
    IdarO, Oct 22, 2013
    #8
  9. OldSkul

    OldSkul Administrator Staff Member

    Nice to know that you fixed it ;)
     
    OldSkul, Oct 22, 2013
    #9

Share This Page