Različna navodila za uporabo 500HD sprejemnika

Unos Image u DreamBox 500HD sa Mini USB kabelom - Tutorial

1. Mini USB male to male USB & Cat5 Network Cable

1Potreban vam je mini usb kabal kao na sliki nize


Instalacija sa USB DreamUP



Na poleđini DM500HD ima USB priključak Mini / USB:
Za učitavanje firmware na DM500HD morate koristiti standardni USB
kabel koji s jedne strane ima USB priključak i USB priključak Mini s
druge strane:



Za sada, nemojte spajati USB kabel na računalo.



Isključite DM500HD i pomaknite dugme u položaj OFF:



Ako je to prvi put da spajite svoj
â��â��Dreambox na svoje računalo sa USB kabelom ',onda je potrebno prvo
instalirati drivere ili DM500HD neće biti "prepoznat.



Preuzmite USB Driver DM500HD i raspakirajte zip datoteku u mapu na računalu.









- Sada instalirajte drivere.

-Otvorite mapu i stisnite na PreInstaler exe.

-Potvrdite klikom na "Install":







Ako sve ide dobro, nakon nekoliko sekundi ćete dobiti poruku s potvrdom:







# Sada, ponovo sa DM500HD off, priključite USB
kabel na računalo i sa tim ste automatski završili instalaciju
upravljačkog programa:



# Prije nego možete koristiti DreamUP morate vidjeti koji COM port je
'dodijeljen za serijski pretvarač / USB Dreambox, a zatim idite na
"Control Panel", zatim "System" i zatim "Advanced postavki sustava"







Sada idite na "Hardware" tab i kliknite na "Device Manager":





Idite na "Ports (COM & LPT)" i vidjeti cete koji je COM dodeljen "SFE RS232 to USB kontroler" u mom slučaju i' COM7:
U ovom trenutku su USB driveri instalirani.A vi znate koji je
dodijeljen COM. Ali nedostaje jos jedna stvar prije nego pocnemo
koristtit DreamUP .A to znači 'IP adresa DM500HD.
Ako znate koji'IP ima Dreambox mogu preskočiti ovaj dio i ići ravno
do DreamUP-a , ali ako ne znate IP adresu postupak je puno sporiji. Da
budem precizan, DreamUP se može koristiti bez aktiviranja "Koristi
Network" i stoga ne trebate znati IP Dreambox, ali bez te funkcije,
firmware će se učitavat samo preko serijskog to veoma 'sporo, tako da je
potrebno više "trideset minuta, ali ako koristite Network i firmware
učita i koristi mrežnu vezu to traje nekoliko minuta.



Evo malo nize mozete skinuti drivere

Evo jos link sa slikama i tutorialom na italijanskom,ako kome pomogne:

Code:

http://www.dreambox.it/guide_installare_fw_in_flash_500hd.htm

Evo probao sam objasniti na nasem jeziku uz pomoc google prevoditelja.Nadam se da ce biti od koje koristi

 

DM500 HD Flashing with DreamUp ​

How to flash your Dreambox DM500 HD with DreamUp



First disconnect the box from main power

start the program "DreamUp



select your comport

maybe use network

if network: enter the local IP from your PC, enter a remote IP for your Box




press the "Connect" - button

and then connect the box to main power

please wait now



after the flash loader is transfered into the Box select the firmware by pressing

the "Flash" - button




select the firmware and click "open"


upload starts now, please wait





Box is flashing the new firmware into the flash memory, please wait



flashing done, press "OK"

press "disconnect then exit"

restart the box

 

DM500 HD Flashing firmware by Browser​

Flashing a new firmware by Browser



What you need to flash



You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other

images like *.img files. Don't try it - it won't work.



You need either a DHCP server and a configured bootloader



You need a browser and a network cable. Connect your Dreambox to a switch/hub/router in your lokal LAN.



To flash a new image, you can use the second stage loader. It must be present and not broken.



The following steps assume you have a DHCP server.

If you don't have one, you have to setup
 an IP address (klick) in the bootloader's serial setup.





- Power down the Dreambox, either using "shutdown" and by switching off by the power switch.

Standby is not enough!



- (1.) Press and hold the power button.

- (2.) Switch on your Dreambox.

- (3.) Your Dreambox will get the next free DHCP IP address from your router.



- Now, open a browser on your PC.

(1.) enter in the address line "http://ip/" .

- (2.) on the bottom of the page, there's a link called "firmware upgrade". Click it.


- On the next page, you can select the flash image you want to flash. be sure that it has the ".nfi" extension.

You can't flash other images (like .img)!

- Click on "FLASH!" and wait. It might take some time to upload and flash the image.

- Switch the box off again, and on again. The new image should be flashed and working.

 

DM500 HD - manual IP



Setup a manual IP address in the bootloader:



OK, you don't have an DHCP server. That's normal if you don't have a
router or configured one
by yourself. You don't need to install one, but
you need to connect your Dreambox by a USB cable now.



You need to know which IP to give to your Dreambox. If you don't know
which IP to choose, please ask
someone who can help you. You can choose
any IP which is "near" your PC's IP address, but the 
IP should not be
used by any other device.



For example, if your PC's IP is 192.168.0.5, you could use
192.168.0.10,
unless another device already uses that. In that case, just choose
192.168.0.11, or whatever. It just needs to be in the 192.168.0.x range,
where x is >= 1 and