Post

TNTSAT works again in OScam!

From a few days ago OScam yet again supports TNTSAT Viaccess card. I already updated config for this card which can be found here:

TNTSAT Viaccess OScam Config

I removed aes key but you can find it by simply entering “tntsat aeskey 9a” in google. You only need to put one aes key in oscam, not three keys which was the case previously. Enjoy watching this card ūüėČ

Post

HD+ HD03 card and OScam

hd03_3

For all those who are asking yourself what is going on with new HD03 card and OScam here is the answer:

CARD IS NOT WORKING IN OSCAM BECAUSE OF PAIRING.

What does this means? This means that card only works in official HD+ receiver and in CI+ module. This is caused by activated CAK7 pairing and has still not been cracked. You are now forced to use CI+ module if you want to use this card in unofficial receiver. But I am not even sure if CI+ modules work in unofficial receivers like DM or Vu+!

And dont even try to search for boxkey and rsakey because there isn’t any to be found on the web. Also old boxkey and rsakey from HD02 and HD01 do not work with HDo3 card!

Post

Sky DE 098C NDS OScam Config

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120

[newcamd]
Key = 0102030405060708091011121314
Port = 34000@098C:000000

‚ÄĒ‚ÄĒ

[reader]
label = SkyDE
Protocol = internal
detect = CD
device = /dev/sci0
Group = 1
EMMCache = 1,3,2
CAID = 098C
ident = 098C:000000

‚ÄĒ‚Äď

[account]
user = user
pwd = pass
group = 1
au = SkyDE

Post

OScam Configs Collection

Here is an collection of all OScam Configs that are available on this blog. I hope that browsing among all these configs is a bit easier now!

Post

How to use TNTSAT with OScam and CCcam

1. You can share TNTSAT using OScam as cardreader and CCcam or OScam as client.
2. CCcam wont work as cardreader as it does not support TNTSAT cards!
3. You can connect OScam and CCcam/OScam using CCcam (C line) or Camd35 (L line) protocol. Newcamd does not support TNTSAT.
4. In my opinion it is the best to use CCcam as sharing protocol between OScam and CCcam or OScam.

OScam SERVER (CCcam protocol)

oscam.server
[reader]
label = tntsat
protocol = internal
device = /dev/sci1 or sci0
services = tntsat
caid = 0500
ident = 0500:030B00
detect = cd
mhz = 357
cardmhz = 357
aeskeys = 0500@030B00:439…C43,A79…F26,EF3…BE3 #you can find them asking google
group = 1
emmcache = 1,3,2

oscam.conf
[cccam]
port                          = 16777
version                       = 2.3.0
ignorereshare             = 1 or 0 if you want to control reshare globally. If you use 1 then you can change reshare on reader/user level.

oscam.dvbapi
You can get dvbapi for tntsat here: http://www.satnigmo.com/470/oscam-dvbapi-for-tntsat/

oscam.services
[tntsat]
caid = 0500
provid = 030B00
srvid =2458,232A,245E,2329,20B3,20AE,20A5,20B6,1F48,25E5, 25E6,25E7,2
649,25E9,264D,2650,2651,25ED,25EE,25EF,2653,25E8,2 64A,264B,26
4C,25EA,264E

[account]
user = tntsat_cccam
pwd = tntsatcccam
group = 1 #same as tntsat reader
cccmaxhops = 1
cccreshare = 1
au = tntsat

CCcam CLIENT

In CCcam.cfg add this line:
C: IP of server port user password no

OScam CLIENT

[reader]
label                         = tntsat_server
protocol                      = cccam
device                        = IP of server,16777
user                          = tntsat_cccam
password                      = tntsatcccam
group                         = 1 or whatever you want or need
ccckeepalive                  = 1
cccmaxhops                    = 1
ccckeepalive                    = 1
audisabled                        = 1

OSCAM SERVER (Camd35 protocol)

oscam.server
[reader]
label = tntsat
protocol = internal
device = /dev/sci1 or sci0
services = tntsat
caid = 0500
ident = 0500:030B00
detect = cd
mhz = 357
cardmhz = 357
aeskeys = 0500@030B00:439…C43,A79…F26,EF3…BE3 #you can find them asking google
group = 1
emmcache = 1,3,2

oscam.conf
[cs357x]
port                          = 15999
serverip                      = 192.168.1.xxx

oscam.dvbapi
You can get dvbapi for tntsat here: http://www.satnigmo.com/470/oscam-dvbapi-for-tntsat/

oscam.services
[tntsat]
caid = 0500
provid = 030B00
srvid =2458,232A,245E,2329,20B3,20AE,20A5,20B6,1F48,25E5, 25E6,25E7,2
649,25E9,264D,2650,2651,25ED,25EE,25EF,2653,25E8,2 64A,264B,26
4C,25EA,264E

[account]
user = tntsat_camd35
pwd = tntsatcamd35
group = 1 #same as tntsat reader
au = tntsat

CCcam CLIENT

In CCcam.cfg add this line:
L: IP of server 15999 tntsat_cccam tntsatcccam 0500 030B00

OScam CLIENT

[reader]
label = tntsat_server
protocol = cs378x
device = IP of server,15999
user = tntsat_camd35
password = tntsatcamd35
caid = 0500
ident = 0500:030B00
group = 1
emmcache = 1,3,2

Powered by moviekillers.com.com