Archive for July, 2012

Post

OScam Cache-EX Mode 3 Tutorial

Cache-EX function enable us to exchange cache that is created in OScam. More users and local cards you have, more cache you produce. Cache is then used to releave stress on our local cards. This is especially useful for Sky UK (and other providers which use NDS encryption) which is very popular package.

In this tutorial I am using mode 3 (there are three modes: mode 0, mode 1 and mode 3) and CCcam protocol. At first almost all used Camd35 but then CCcam became preferable option because of its stability! Setting mode 3 can be a bit challenging, therefore you need to follow this tutorial very carefully! I will try to explaing cache-ex (mode 3) on various examples.

USER A
oscam.conf

[cccam]
port = 12444 or something else

oscam.server

[reader]
label = reader1
description = your local card, SKY UK for example
group = 11

[reader]
label = reader2
description = your local card, SKY Italia for example
group = 12

[reader]
label = userb
protocol = cccam
device = IP or DNS address,12555
user = usera
password = usera
cacheex  = 3
cacheex_maxhop = 2
dropbadcws = 1
cccmaxhops = 0
ccckeepalive = 1
cccreconnect = 0
audisabled = 1
group = 11,12,20 # use all groups where you want to get ecms from. Include your local cards and other external clients/peers (Cccam, Newcamd, etc.)! Also add group 20 here which was created in oscam.user for cache-ex users!

oscam.user

[account]
user = userb
pwd = userb
group = 20 # Use unique number here. Remember, this account is made for cache-ex only!
uniq = 3
cacheex = 3
cacheex_maxhop = 2
cccmaxhops = -1
cccreshare = 0

USER B
oscam.conf

[cccam]
port = 12555 or something else

oscam.server

[reader]
label = reader1
description = your local card, Cyfra+ for example
group = 11

[reader]
label = usera
protocol = cccam
device = IP or DNS address,12444
user = userb
password = userb
cacheex = 3
cacheex_maxhop                = 2
dropbadcws                    = 1
cccmaxhops                    = 0
ccckeepalive                  = 1
cccreconnect                  = 0
audisabled                    = 1
group = 11,30 # use all groups where you want to get cache from them. Include your local cards and other clients (Cccam, Newcamd, etc.)! Also add group 20 here which was created in oscam.user for cache-ex users!

oscam.user

[account]
user = usera
pwd = usera
group = 30 # Use unique number here. Remember, this account is made for cache-ex only!
uniq = 3
cacheex = 3
cacheex_maxhop = 2
cccmaxhops = -1
cccreshare = 0

IF YOU HAVE MORE THAN 1 CACHE-EX PEER/USER, CHECK THIS CONFIG

oscam.user

[account]
user = bigcar
pwd = bigcar
group = 20
uniq = 3
cacheex = 3
cacheex_maxhop = 2
cccmaxhops = -1
cccreshare = 0

[account]
user = smallcar
pwd = smallcar
group = 20
uniq = 3
cacheex = 3
cacheex_maxhop = 2
cccmaxhops = -1
cccreshare = 0

[account]
user = verysmallcar
pwd = verysmallcar
group = 20
uniq = 3
cacheex = 3
cacheex_maxhop = 2
cccmaxhops = -1
cccreshare = 0

oscam.server

[reader]
label = bigcar
protocol = cccam
device = ddd.zapto.org,12222
user = asdasdasd
password = asdasdasdads
cacheex = 3
group = 5,6,10,20
cacheex_maxhop                = 2
dropbadcws                    = 1
cccmaxhops                    = 0
ccckeepalive                  = 1
cccreconnect                  = 0
audisabled                    = 1

[reader]
label = smallcar
protocol = cccam
device = xx.dyndns.ws,56666
user = xx
password = xxx
cacheex = 3
group = 5,6,10,20
cacheex_maxhop                = 2
dropbadcws                    = 1
cccmaxhops                    = 0
ccckeepalive                  = 1
cccreconnect                  = 0
audisabled                    = 1

[reader]
label = verysmallcar
protocol = cccam
device = xx.dyndns.ws,60000
user = xxx
password = xxx
cacheex = 3
group = 5,6,10,20
cacheex_maxhop                = 2
dropbadcws                    = 1
cccmaxhops                    = 0
ccckeepalive                  = 1
cccreconnect                  = 0
audisabled                    = 1

IMPORTANT

5,6 and group 10 are groups where you have your local cards and external clients. In this way you will generate some decent cache. You can also use only local cards for generating cache, but i do not recommend this option.

IF YOU WANT OPTIMAL SETTINGS FOR YOUR OSCAM AND CACHEEX, ALSO CHECK THIS ARTICLE:

http://www.satnigmo.com/1261/optimal-settings-for-oscam-cache-ex-mode-3/

FOR DISCUSSION ABOUT THIS ARTICLE VISIT THIS THREAD ON FORUM:

http://www.satnigmo.com/forum/index.php?threads/how-to-use-cache-ex-mode-3.488/

 

Facebook Notice for EU! You need to login to view and post FB Comments!
Post

Connect OScam with CCcam using CCcam protocol

This tutorial will be short. It is intended for people who have CCcam central server (Linux PC for example) and receivers with OScam which act as clients. Protocol which is used between OScam and CCcam is good old CCcam 🙂

Put these lines in oscam.server:

[reader]
label                         = remote
protocol                      = cccam
device                        = 192.168.1.119,12333  #Change these two settings according to your setup. 12333 is port of my CCcam server. If OScam and CCcam runs on same receiver, just use 127.0.0.1 instead of regular 192.168.x.x IP address!
user                          = test #You will have to create F line in CCcam.cfg with username and password that you used here!
password                      = testxxx
group                         = 1
emmcache                      = 1,3,2

This config is basic but you dont need additional (more advanced) settings. It works just fine! If you want faster zapping, then i recommend that you setup oscam.dvbapi file!

In CCcam.cfg create this line:

F: test testxxx 2 0 0 { 0:0:1 }

2 0 0 means that your receiver will get your local cards (if you have them), hop 1 and hop 2 cards. If you have server with only hop1 cards, you can just use 1 0 0

0 0 1 means that your receivers cannot share to other receivers. Thats ok, because you dont need reshare in your house. Reshare (0 0 2) is usually needed if you are sharing with clients outsite your house.

Thats it, for more info use comments.

For discussion please visit this thread:

http://www.satnigmo.com/forum/index.php?threads/oscam-to-cccam-cccam-protocol.541/

For other “connect” tutorials, visit these links:

Facebook Notice for EU! You need to login to view and post FB Comments!

Powered by moviekillers.com.com